Whether you are using the Bluetooth scale or Visual mode, the process is the same for adding full bottles and cases.

Full Bottles

  1. Scan the barcode or search for the bottle
  2. Tap the "+" or "-" buttons in the unit section to adjust the count (you can also tap the number in between the "+" and "-" to open the keypad and type a number)
  3. The number of full units displays on the right of the screen.
  4. Tap the Confirm button

*Note - you can add partial and full bottles at the same time. For example, if you had a partial bottle and a full bottle right behind it on the shelf, you could weigh the partial and add the full unit. 

You should only submit bottles together if they are physically grouped together in your venue. Otherwise, you should scan and submit them separately.

Cases

  1. Scan the barcode or search for the bottle
  2. Tap the "+" or "-" buttons in the case section to adjust the count (you can also tap the number in between the "+" and "-" to open the keypad and type a number)
  3. The number of full units displays on the right of the screen (it will multiply the number of cases by the case size)
  4. Tap the Confirm button

Did this answer your question?